當前位置：張家港市中南化工機械有限公司>>立式刮刀下卸料全自動離心機>>PAUT上懸式刮刀卸料自動離心機

PAUT上懸式刮刀卸料自動離心機

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地張家港市

在線詢價收藏產品查看聯系電話

化工機械設備網采購部電話：0571-88918531QQ:2568841715

聯系方式：查看聯系方式

更新時間：2023-10-14 11:36:37瀏覽次數：57次

聯系我時，請告知來自化工機械設備網

產品分類 品牌分類

  立式刮刀下卸料全自動離心機

全部產品列表

暫無信息

張家港市中南化工機械有限公司

經營模式：其他

商鋪產品：22條

所在地區：江蘇張家港市

詢價 給他留言

產品簡介

詳細介紹

1.技術參數.png

項目	型號
項目	PAUT1250NA	PAUT1250NB	PAUT1320N	PAUT1600N
轉鼓直徑mm	1250	1250	1320	1600
轉鼓容積L	281	450	500	880
裝料kg	380	610	660	1180
轉鼓轉速r/min	970	970	900	800
分離因數	658	658	598	574
電機功率kw	22	30	30	45
外形尺寸（長寬高）mm	210020002200	210020002600	210020002600	270023502800
機器重量kg	4200	5000	5500	10000

2.產品特點.png

電機上置式直聯傳動，傳動和轉鼓回轉中心與機器中心重合，運行平穩。
液態阻尼減振器，無基礎安裝，便于操作和維護。
大長徑比，裝料容積大。
機殼與機座剛性連接全承載結構，結構簡單緊湊。
獨立式軸承座，軸承支承跨距大，轉鼓重心低，承載能力大。
無皮帶傳動，無磨擦粉塵。
全自動操作程序控制，運行可靠、安全。
可配置氮氣保護裝置，實現防爆場合的應用。

Motor mounted direct drive, transmission and drum rotary center and machine center coincidence, smooth operation.
Liquid damping shock absorber, no foundation installation, easy operation and maintenance.
Large aspect ratio, large loading capacity.
The rigid connection between the housing and the frame is a fully loaded structure with simple and compact structure.
Independent bearing block, large bearing span, low center of gravity of drum, large bearing capacity.
No belt drive, no friction dust.
Fully automatic operation program control, reliable and safe operation.
It can be equipped with nitrogen protection device to realize the application in explosion-proof occasions.

3.工作原理.png

主機開動至一定轉速(中速)后，物料經進料管、加料管，進入離心機轉鼓，并在離心力場的作用下，液體經篩網轉鼓壁上的小孔甩出轉鼓外。截留在篩網上的濾餅，待轉鼓內濾餅達到設定量后，停止加料，關閉進料閥，在洗滌和高速甩干后，將主機在低速運轉下由刮刀將濾餅刮下，濾餅則由出料斗將濾餅卸出。

根據用戶工藝要求及物料特性的不同，每道工序(進料、脫液、刮料等)所需時間，均可在開車前通過編程器做出相應的調整，本機自動化操作可近距離操作，也可遠程控制。本機可進行人工操作，人工操作各工序的進行。則受操作者控制。

After the host machine starts up to a certain speed (medium speed), the material enters the centrifuge drum through the feeding tube and feeding tube, and under the action of centrifugal force field, the liquid is thrown out of the drum through the small holes on the drum wall of the sieve screen.Stop feeding and close the feeding valve after the filter cake in the drum reaches the set quantity. After washing and high-speed drying, the host machine will scrape the filter cake with a scraper under low-speed operation, and the filter cake will be unloaded by the outlet hopper.

According to the user's different process requirements and material characteristics, the time required for each process (feeding, dewatering, scraping, etc.) can be adjusted by the programmer before starting the machine.The machine can be operated manually.Is completely controlled by the operator.

4.產品用途.png

上懸式全自動離心機在離心力場作用下，分離、洗滌效果好，對物料的適應性，適用于分離含固相顆?！?.05毫米的懸浮液，采用液壓窄刮刀、低速封閉式卸料、卸餅性能好、晶粒不易破碎，適用于熱敏感性強的物料的分離。

廣泛應用于化工、醫藥、食品輕工等領域。

Under the action of centrifugal force field, the upper suspension automatic centrifuge has good separation and washing effect and is adaptable to materials. It is applicable to the separation of suspension with solid phase particles 0.05mm. It adopts hydraulic narrow scraper, low speed closed unloading, good cake unloading performance and not easy to break grain.

Widely used in chemical industry, medicine, food and other fields.

5.工作流程.png