阿克隆耐磨試驗機

本機用于測定硫化橡膠的耐磨性能，試驗時試樣與砂輪之間在一定的傾斜角度，且一定負荷作用下進行摩擦，測定試樣在一定里程內的摩耗體積。

8. Net weight 60kg

Akron use

1. Load of sample 26.7 ± 0.2N

7.外形尺寸 600×480×400(mm)

1.試樣承受負荷 26.7±0.2N

2.膠輪軸回轉速度 76r/min±2r/min

5.電源電壓 Ac220v

7. Boundary dimension 600 × 480 × 400 (mm)

阿克隆耐磨試驗機主要技術參數

This machine is used to measure the wear resistance of vulcanized rubber. During the test, the friction between the sample and the grinding wheel is carried out at a certain angle and under a certain load, and the friction volume of the sample within a certain mileage is measured.

3.砂輪軸回轉速度 34r/min±1 r/min

6. Power consumption 250W

Main technical parameters of Akron

3. Rotation speed of grinding wheel shaft 34R / min ± 1 R / min

6.功 耗 250W

4.膠輪軸與砂輪之間的夾角可調范圍15°或25°

2. Rotation speed of rubber wheel shaft 76r / min ± 2R / min

8.凈 重 60kg

4. The angle between the rubber wheel shaft and the grinding wheel can be adjusted within 15 ° or 25 °

5. Power supply voltage AC220V

阿克隆用途