賀德克先導式減壓閥圖片,優勢HYDAC先導式減壓閥
先導式減壓閥VP-DBP10是一個無泄漏的提升閥 - 安裝的底板 -
用于通過打開出口來克服彈簧力來限制入口壓力。 Qmax = 200l / min Pmax = 350巴
副板設計的先導式泄壓閥VP-DBP10有一個先導和主級 - 兩種都是提升型。
其功能是限制系統中的壓力。 當P口處的液壓力超過預先設定的先導級的彈簧張力，
提升閥打開，

賀德克先導式減壓閥圖片,優勢HYDAC先導式減壓閥
Due to the resulting unbalanced pressure, the main piston moves against the return spring and causes the oil to flow from port P to T.
This continues until the system pressure is equal to the spring pressure and the valve is closed again.
Each valve is designed to be sure that it can reach the maximum pressure operated without the risk and life of the environment.
For this value, we assume the warranty that we have proven the test. It changes from valve to valve.
Each valve is designed to have a maximum flow - due to its nominal size. The flow is still reasonable to operate the valve
60°環境溫度。 穩定的組合浪涌和非常熱的溫度可以導致情況下的失效螺線管。 
所以總是好熱耗散和電壓水平必須保證。
超越在過濾中的粒徑21/19/16至18/16/13類可能導致立即失效的部件
液壓系統時這些顆粒在關鍵區域累積。
標稱張力和電壓在電磁閥中使用線圈
其設計為安全操作在+/- 15％的電壓范圍內zui大額定電壓。 
So always good heat dissipation and voltage levels must be guaranteed.
Pilot-type pressure reducing valve VP-DBP10 is a non-leaking poppet valve -
Used to open the outlet to overcome the spring force to limit the inlet pressure. Qmax = 200 l / min Pmax = 350 bar
由于所產生的壓力不平衡，主要活塞抵抗復位彈簧移動并使油從端口P到T。
這繼續，直到系統壓力等于彈簧壓力和閥再次關閉。
每個閥門設計一定它可以達到的zui大壓力操作沒有對環境的風險和生活。 
對于這個值，我們假設保修，我們已經證明測試。 它從閥到閥變化。

賀德克先導式減壓閥圖片,優勢HYDAC先導式減壓閥
每個閥門設計一定zui大流量 - 由于其公稱尺寸。在流量仍然合理的操作閥門
Pilot design of the pilot-type pressure relief valve VP-DBP10 has a pilot and the main level - both are lifting type.
Its function is to limit the pressure in the system. When the hydraulic pressure at the port P exceeds the preset pilot spring tension,
The poppet valve opens and the oil flows from the rear to the tank port.