立式冷凍干燥機
VERTICAL FREEZE DRYER
ZX-LGJ-18型
■結構小，結構緊湊，操作方便
■冷阱開口大，無內盤
■樣品預凍功能，無需低溫冰箱
■干燥室要用無色透明一次性注塑成型聚碳材質，防腐蝕，不易碎，不易泄露，可清楚觀察樣品凍干的全過程
■冷阱和操作臺面為全不銹鋼，耐腐蝕，易清潔
■標準KF真空接口，安裝簡單可靠，可與多種真空泵連用
■可配充氣閥，充干燥惰性氣

立式冷凍干燥機

VERTICAL FREEZE DRYER    

ZX-LGJ-18型

■結構小，結構緊湊，操作方便

■冷阱開口大，無內盤

■樣品預凍功能，無需低溫冰箱

■干燥室要用無色透明一次性注塑成型聚碳材質，防腐蝕，不易碎，不易泄露，可清楚觀察樣品凍干的全過程

■冷阱和操作臺面為全不銹鋼，耐腐蝕，易清潔

■標準KF真空接口，安裝簡單可靠，可與多種真空泵連用

■可配充氣閥，充干燥惰性氣味

The structure is small, the structure is compact, and the operation is convenient.

Big openings of the cold trap, without coil

Sample pre freezing function, no need for low temperature refrigerator

Dry room with colorless and transparent one-time injection molding poly carbon material, anti-corrosion, not fragile, not easy to leak, can clearly observe the whole process of sample freeze dry

Cold trap and operating table for all stainless steel, corrosion resistance, easy to clean

International standard KF vacuum interface, installation is simple and reliable, can be used with a variety of vacuum pumps

Can be equipped with filling valve, filling dry inert odor

技術參數：

■冷凝溫度：<-60℃  （空載）

■真空度：  <15Pa  （配備4升國產防回油真空泵）

■凍干面積：0.18-0.27 m²

■捕水能力：6Kg/24h

■物料盤規格：

ф240mm共4層層間距80mm（散裝物料）；ф240mm共6層 層間距50mm（散裝物料）可選配；ф220mm共3層（瓶裝物料，手動壓蓋裝置）

 普通型：特殊設計的不銹鋼樣品架，樣品盤間距可調，層數自由設定；物料干燥盤直徑為ф240mm,共四層；可放置物料約1800ml（料厚10mm）

 壓蓋型：三層擱板ф220mm，擱板間距70mm，可放置物料1100ml厚度10mm）；可放置ф22mm西林瓶250只；安培瓶1100只

 多歧管凍干瓶：同時zui多掛瓶為8個，分為以下4種規格：500ml、250ml、100ml、50ml,可根據需要自由組合，凍干過程中可隨時更換凍干瓶，同時凍干幾種不同樣品，凍干速度快、時間短、操作簡單。

■主機尺寸：555L × 555W × 960H（mm)

■電源要求: 220V±10% 50Hz 1800W

Technical parameter:

Condensing temperature: <-60 degrees (no load)

Vacuum degree: <15Pa (equipped with 4 liters of domestic anti back oil vacuum pump)

Freeze dry area: 0.18-0.27 - M

Water capture capacity: 6Kg/24h

Material tray size:

240 Phi a total of 4 layers of pitch 80mm (bulk material); 240 phi 6 layer spacing 50mm (bulk material) can be matching; Phi 220mm a total of 3 layers (of materials in vials, manual capping device)

Common type: stainless steel sample holder with special design, sample plate spacing can be adjusted, free to set the layers; drying disk diameter Phi 240mm, four layers, placed the material about 1800ml (material thickness 10mm)

Gland: three shelves Phi 220mm, shelf spacing 70mm, placing the material 1100ml thickness 10mm); can be placed Phi 22mm vials 250; ampere bottle 1100

Manifold freeze dry bottles: Hang 8 the bottles at most, is divided into the following four kinds of specifications: 500 ml, 250 ml, 100 ml, 50 ml, according to needs, free combination, freeze dry process can be replaced at any time freeze-dried vials, and lyophilized several different samples and freeze drying speed, time is short, the operation is simple.

Host size: 555L * 555W * 960H (mm)

Power requirements: 220V + 10% 1800W 50Hz