[ 主要特點 ]
  SG型三足式離心機為手動刮刀下部卸料、間歇操作的過濾式離心機。適合分離含固相（粒狀、結晶狀或短纖維狀），濃度5-6%，粒度范圍0.05-1.5毫米的懸浮液的分離。該系列離心機結構簡單、操作方便，各操作工序可按要求任意調整，濾渣能得到充分洗滌，固相不易破損，適應性強，由于采用刮刀下部卸料，減輕了勞動強度，廣泛用于化工、輕工、食品、制藥、冶金等行業。

 SG-type three-feet-type centrifuge
[Main Features]
  SG-type three-feet-type centrifuge for the manual scraper bottom discharge, intermittent operation of the filter-type centrifuge. Suitable for the separation with solid phase （granular, crystalline or short-fibrous）, the concentration of 5-6%, 0.05-1.5 mm particle size range of separation of suspensions. Centrifuges in the series of simple structure, easy to operate, the operator may require any adjustment process, can be fully dregs washing, solid-phase is not easy damaged, adaptability, due to the lower scraper discharge, reducing the labor intensity, is widely used in chemical , light industry, food, pharmaceutical, metallurgical and other industries.


[ 結構與原理 ]
  調速電動機帶動轉鼓旋轉，調節轉速至中速，物料由上部加入轉鼓經布料盤均勻灑布到鼓壁，升至高速后，在離心力的作用下，液相穿過濾布和鼓壁孔排出，固相截留在轉鼓壁內，待轉鼓降至低速后，旋轉刮刀將固相從鼓壁刮下由離心機下部排出。
[Structure and Principle]
Motor driven rotating drum to regulate the speed to medium speed, adding material from the upper drum set by the fabric evenly onto the drum wall cloth, rose after the high-speed, in the role of centrifugal force, the liquid through the filter cloth and the drum wall hole emission, solid-phase cut-off wall in the drum when the drum down to low speed, the rotary blade to solid-phase刮下from the drum wall from the bottom of the centrifuge.

注：以上技術參數以產品使用說明書為準

[ 結構與原理 ]

[訂貨須知]
針對不同的分離要求，我們設計了相應型式供客戶選擇，因此客戶在訂貨時可對以下情況作出確認
材　　質：與物料接觸部分的村料可為不銹鋼、鈦材、碳鋼、襯橡膠、襯塑料等。
驅動方式：普通異步電動機，隔爆型異步電動機，電磁高速或變頻調速。
[Ordering Information]
Separation for different requirements, we designed for the customer to choose the appropriate type, so customer orders can be made to confirm the following: Material: The material part of the village of contact materials for stainless steel, titanium, carbon steel, rubber lining, plastic lining. Driving Mode: Normal asynchronous motor, explosion-proof asynchronous motor, electromagnetic high-speed or variable frequency speed control.