當前位置：張家港市中南化工機械有限公司>>臥式螺旋卸料沉降離心機>>LW臥式螺旋卸料沉降式離心機（向心泵出液型）

LW臥式螺旋卸料沉降式離心機（向心泵出液型）

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地張家港市

在線詢價收藏產品查看聯系電話

化工機械設備網采購部電話：0571-88918531QQ:2568841715

聯系方式：查看聯系方式

更新時間：2023-10-14 11:59:16瀏覽次數：73次

聯系我時，請告知來自化工機械設備網

產品分類 品牌分類

  臥式螺旋卸料沉降離心機

全部產品列表

暫無信息

張家港市中南化工機械有限公司

經營模式：其他

商鋪產品：22條

所在地區：江蘇張家港市

詢價 給他留言

產品簡介

型號轉鼓直徑mm長徑比L/D轉鼓轉速r/min分離因數主電機功率kw機器重量kg外形尺寸（長寬高）mmLWX355*14603504

詳細介紹

1.技術參數.png

型號	轉鼓直徑mm	長徑比L/D	轉鼓轉速r/min	分離因數	主電機功率kw	機器重量kg	外形尺寸（長寬高）mm
LWX355*1460	350	4.17	4000	3100	22	2020	323510101029
LWX355*1460	420	4	3500	3080	30-37	3500	345913201303
LWX355*1460	530	4	3200	3040	45-55	4200	405416501431

2.產品特點.png

LW型離心機是一種臥式螺旋卸料，連續操作的沉降設備。轉鼓與螺旋以一定差速同向高速旋轉，物料由進料管連續引入輸料螺旋內筒，加速后進入轉鼓，在離心力場作用下，較重的固相物沉積在轉鼓壁上形成沉渣層。

輸料螺旋將沉積的固相物連續不斷定推至轉鼓錐端，經排渣口排出機外，較輕的液相物則形成內層液環，由轉鼓大端溢流口連續溢出轉鼓，經排液口排出機外。

本機能在全速運轉下，連續進料、分離、洗滌和卸料。具有結構緊湊、連續操作、運轉平衡、適應性強、生產能力大、維修方便等特點。

適合分離含固相物粒度大于0.005mm、濃度范圍在2-40％的懸浮液。廣泛用于化工、輕工、制藥、食品、環保等行業。

LW centrifuge is a kind of horizontal spiral discharge, continuous operation of sedimentation equipment.

The drum and the screw rotate at the same speed at a certain difference. the material is continuously introduced into the inner cylinder of the feeding screw from the feed tube and accelerated into the drum. Under the action of centrifugal force field, the heavier solid deposits on the drum wall to form a sediment layer.

The solid phase deposited by the feeding screw is continuously pushed to the cone end of the drum, and the lighter liquid phase is discharged from the machine through the slag discharge orifice, and the lighter liquid phase is formed into an inner liquid ring, which is continuously overflowed from the drum through the overflow port at the large end of the drum and discharged out of the machine through the discharge port.

The machine is operated at full speed, continuous feeding, separation, washing and unloading.

The utility model has the characteristics of compact structure, continuous operation, operation balance, strong adaptability, large production capacity, convenient maintenance and so on.

It is suitable for the separation of suspension containing solid phase with particle size larger than 0.005mm and concentration range of 2 ≤ 40%. Widely used in chemical, light industry, pharmaceutical, food, environmental protection and other industries.

3.工作原理.png

該機型主要用于物料的固一液分離。轉鼓和螺旋以差速同向高速旋轉，物料經進料管進入。

在離心力作用下，固相物料沉積在轉鼓壁上形成沉渣層，液相物料形成液相環，由轉鼓壁開始向內依次形成固相層和液相層。

螺旋將沉積在轉鼓壁上的固相物料連續不斷的推至轉鼓錐端，經排渣口排出機外。液相經轉鼓大端向心泵排出。

This machine is mainly used for solid-liquid separation of materials.

The drum and screw rotate at the same speed and at the same speed, and the material enters through the feed pipe.

Under the action of centrifugal force, the solid phase material is deposited on the drum wall to form a sediment layer, the liquid phase material forms a liquid phase ring, and the solid phase layer and the liquid phase layer are formed in turn from the drum wall to the inside.

The solid material deposited on the drum wall is continuously pushed to the cone end of the drum and discharged out of the machine through the slag discharge port.

The liquid phase is discharged through the drum large end concentric pump.

6.產品結構圖.png